3M 220 Safety-Walk Slip-Resistant Tape for bathrooms – clear, 18,3m

3M 220 Safety-Walk is a transparent slip-resistant tape for bathrooms. The product creates comfort with its finely textured, elastic upper surface and aims to prevent slips and accidents. The tape is durable and has a long life.

The reverse side is covered with pressure-sensitive adhesive, which has a protective coating. It is strong and ensures stable adhesion, does not shrink, and shifts over time. After peeling, it does not leave unpleasant and difficult to clean traces of glue. The tape is suitable for outdoor and indoor use (bathrooms, showers, bathtubs, wet rooms, swimming pools, saunas, changing rooms, surfboards, boats, etc.). Adheres well to all tiles and bathroom surfaces and is used barefoot.

The product is also available with a roll length: 4.57m, 9.15m, 18.3m

1. Carefully clean the surface.
2. Make sure surface is clean,dry and not broken.
3. First prime the surface then star applying the tape.
4. Individual pieces should be spaced a minimum of 12 mm apart and a maximum of 50 mm apart.
5. Peel protective liner back about 50 mm from one end and position piece on surface.Note: minimize touching (contaminating) adhesive with fingers.
6. Finally press into firm contact with surface using a rubber hand roller by starting in middle and rolling out towards edges.

Warning: On steps, apply 3M Safety-Walk materials 12 to 15 mm from stair edge to prevent edge curl and premature wear.