Description
3M 710 Safety-Walk Slip-Resistant Tape – For industrial use
3M 710 Safety Walk Slip Resistant Tape is a highly resistant anti-slip tape for extreme heavy traffic. It is made of large abrasive particles with mineral coating, glued with a strong and durable polymer with plastic tape for a maximum stable surface.
Suitable for all slippery surfaces with heavy pedestrian traffic and trucks. High durability, guaranteeing 3 years of service life in extreme conditions. It does not shrink over time, remains in the created shape and size when glued. After peeling, it leaves no traces of glue, a prerequisite for collecting dust and bacteria. Prevents the possibility of accidents at work.
Type of surface:
- painted metal
- plastic
- wood
- metal
- painted concrete
Application:
- oily wet areas
- platforms and ramps
- machine shops
- agriculture and forestry equipment
- recreational vehicles
- airplane hangars
Advantages:
- high-friction
- slip-resistant
- open abrasive pattern resists clogging and reduces clean up time
- chemical resistance
- excellent bond for a secure hold
- pressure-sensitive adhesive
Install Guide:
- Carefully clean the surface.
- Make sure surface is clean,dry and not broken.
- First prime the surface then star applying the tape.
- Individual pieces should be spaced a minimum of 12 mm apart and a maximum of 50 mm apart.
- Peel protective liner back about 50 mm from one end and position piece on surface.Note: minimize touching (contaminating) adhesive with fingers.
- Finally press into firm contact with surface using a rubber hand roller by starting in middle and rolling out towards edges.
Warning: On steps, apply 3M Safety-Walk materials 12 to 15 mm from stair edge to prevent edge curl and premature wear.
Reviews
There are no reviews yet.