Description
3M 690 Safety-Walk Slip-Resistant General Purpose, Photoluminescent Tape - 20m
Wherever there is darkness, there is danger. That’s why you need to know about the 3M Safety-Walk 690 3M 690 Slip-resistant photoluminescent tape. This is a self-adhesive abrasive tape with a mineral coating, glued with a strong and supporting polymer with a plastic tape for a maximum stable surface.
After charging, the photoluminescent tape light up, reducing the risk of accidents. It is suitable for all slippery surfaces with heavy pedestrian traffic and light trucks.
It does not shrink over time, remains in the created shape and size when installed. The product does not leave traces of glue, a prerequisite for collecting dust and bacteria.
Type of surface
- painted metal
- plastic
- painted wood
- porous concrete
- painted concrete
- marble
- terazzo
- polyethylene
- vinyl tile
- quarry tile
- gel-coated fiberglass
- epoxy floors
Application:
- stairways
- entrances
- emergency exit
- factories
- warehouses
- ramps
- machine steps
Advantages:
- slip resistant photoluminescent
- easy application on wet, dry and clean surfaces
- safe slip resistant surface
- wide temperature range
- chemical resistance
- easy to apply in cold weather
- phthalate-free
- transparent
How to install:
- Carefully remove any dirt or oil from the surface.
- Make sure surface is clean,dry and not broken.
- First prime the surface then star applying the tape.
- Individual pieces should be spaced a minimum of 12 mm apart and a maximum of 50 mm apart.
- Peel protective liner back about 50 mm from one end and position piece on surface.Note: minimize touching (contaminating) adhesive with fingers.
- Finally press into firm contact with surface using a rubber hand roller by starting in middle and rolling out towards edges.
Warning: On steps, apply 3M Safety-Walk materials 12 to 15 mm from stair edge to prevent edge curl and premature wear.
Reviews
There are no reviews yet.